Kingspan Albion Ultrasteel Servicing & Repair
G3 qualified servicing and repair for Kingspan Albion Ultrasteel unvented cylinders — standard, slimline and horizontal — plus older Albion models and Aerocyl heat pump cylinders, across Orpington, Bromley, Sevenoaks and Kent. £140 with no VAT.
Ultrasteel Servicing
- £140 full G3 annual service, no VAT
- £285 cylinder + heat pump together
- Standard, slimline & horizontal
- Annual record for the guarantee
- Aerocyl heat pump cylinders too
About the Ultrasteel
The Ultrasteel is the mainstream model in Kingspan's Albion range. It has a duplex stainless steel inner vessel, oxygen-purge welded, and delivers mains-pressure hot water regulated to 3 bar.
Kingspan's brochure quotes 25 years on the duplex inner vessel against manufacturing defects and two years on parts — with all guarantees subject to terms and conditions that include an annual servicing requirement.
The range covers standard vertical cylinders from 120 to 300 litres, slimline models from 90 to 210 litres for narrow cupboards, and horizontal indirect models from 180 to 300 litres for lofts and eaves. Kingspan also makes the Aerocyl, a cylinder designed for heat pumps.
What I Check on an Ultrasteel
Is it holding 3 bar?
The cylinder relies on its inlet controls to hold working pressure. I check the reducing valve's outlet pressure, clean the strainer and make sure the check valve isn't letting hot water back into the cold main.
Expansion space
The Ultrasteel's potable expansion vessel needs its air charge set correctly to absorb expansion as the water heats. Lose that and water heads for the tundish. The charge is checked and set properly.
Relief valves and discharge
The factory-fitted temperature and pressure relief valve and the expansion relief valve are tested, and the discharge route checked from tundish to termination.
Heat source controls
On an indirect Ultrasteel, the cylinder thermostat, overheat cut-out and two-port valve work together. If the boiler or heat pump keeps heating after the cylinder is satisfied, that's a valve or wiring fault worth catching.
Horizontal installations
Horizontal Ultrasteels usually live in lofts or under eaves, where a slow leak goes unnoticed. Joints, the immersion boss and any drip tray are checked.
Faults I See on Albion Cylinders
Tundish discharging as the cylinder heats
Lost expansion capacity, nearly always. Fixable, and it should be fixed promptly.
Boiler running on after the hot water is up to temperature
A two-port valve sticking open or a wiring fault. It wastes energy and leans on the overheat cut-out, which is there as a last resort.
Low flow at the hot taps
A silted strainer, a tired reducing valve, or scale in our hard water.
Immersion problems
Elements scale up in hard water areas like ours. Replacing one is routine.
What It Costs
A full G3 annual service of a Kingspan Albion cylinder is £140 with no VAT, and you get a written inspection record. If you have a heat pump as well, servicing both in one visit is £285.
Repairs are quoted at a fixed price before I start. Valves, vessels and immersions are what usually fail, not the stainless vessel.
No call-out fee, and I'm not VAT-registered, so the price I quote is the price you pay.
Kingspan Albion Questions
Book Your Ultrasteel Service
£140 with no VAT and a written record for your guarantee, across Orpington, Bromley, Sevenoaks and Kent.
07717 846247
Other Cylinder Guides
Brands and faults I deal with every week.